Find this useful? Support the project: Support me on Ko-fi Gift me a radio on Throne

DM32 Web CPS & Flasher

Install the Open25-DM32 firmware with P25 and NXDN on your Baofeng DM-32UV and edit its codeplug in the browser. Nothing is uploaded to any server: the radio, the backups and your files stay on your computer.

Needs Chrome or Edge on a desktop computer (Web Serial) and the radio's programming cable.

Flasher
Back up, install, update and restore the firmware over the programming cable.
Codeplug editor
FM, AM, DMR, P25, NXDN and P25 trunking channels, AES-256 keys, zones, contacts and the ID database: read and write the radio or save files.
Firmware included
…
Baofeng DM-32UV

Experimental firmware. Experimental firmware: the new base boots on the radio, but its P25/NXDN voice, AES encryption and APRS are not tested on air yet. Always keep the backup the flasher offers. Use it at your own risk, on frequencies you are licensed for.

DM-32UV update mode

  1. Switch the radio off and connect the programming cable to the computer.
  2. Hold PTT and SK1 while you switch the radio on.
  3. A green LED means the radio is in update mode.

The flasher tells you what to do with the radio at each step. Usually switching it off and on when asked is enough; update mode is the factory loader's fallback route.

The AMBE codec is not on this site

This site only hosts the firmware image without the AMBE codec (proprietary to DVSI). The flasher takes the codec from your radio's memory (read during the backup) or from the original Baofeng firmware file you pick, and merges it with the image inside the browser. The codec is never uploaded to any server or distributed here.

Credits

The site's code is MIT (The RadioFoundry Authors, with modifications). The firmware image is GPL-3.0-or-later; its source is in the DM32-nxdn-p25 repository. This site's source